I am tried to install a Pyronix Enforcer. My electrucian has done the following:
The main power from the house consumer unit is using a 10amp fuse circuit and that goes into a spur switch which is then wired into the Enforcer. When I switch on the spur switch to power up the Enforcer the relay trips from consumer unit every time.
Is the Enforcer faulty. Maybe the psu or have we wired the Enforcer on the wrong fuse rating. What could be wrong. My elecrtictiam told me he thinks the Enforcer is faulty and I should change it.
Any ideas what's wrong here?
The main power from the house consumer unit is using a 10amp fuse circuit and that goes into a spur switch which is then wired into the Enforcer. When I switch on the spur switch to power up the Enforcer the relay trips from consumer unit every time.
Is the Enforcer faulty. Maybe the psu or have we wired the Enforcer on the wrong fuse rating. What could be wrong. My elecrtictiam told me he thinks the Enforcer is faulty and I should change it.
Any ideas what's wrong here?
