Pyronix euro mini KEYPAD - no power

[Handymanjo]

If you require help then photos of the wiring helps us determine what the problems could be.
You are being asked to post a photo of the main control panel wiring not the remote keypad .
This is the white box with you say you have checked the fuses ?
By the sound if it you has checked the fuse in the spur and not the fuses on the alarm control panel pcb. .

 

[Wizzle81]

Sorry, here we go

 

[sparkymarka]

Bus fuse 800ma

 

[Wizzle81]

Cheers sparkymarka!!

Next question though, how do I test if the bus fuse has gone or not?

 

[sparkymarka]

Multimeter .... or just replace it ...

 

[Wizzle81]

Cool, I'll give that a go and let you know the outcome. Appreciate all the help on this BTW

 

[Wizzle81]

Bus fuse has gone. If I got a replacement, what voltage would I get as there is nothing on there. Also, I take it I can pick these up at screw fix?

No I see it now 250v

 

[sparkymarka]

Think you might struggle ....looked on Halfords but smallest size is 1.5 amp ....what area are you in ?

 

[sparkymarka]

 

[Wizzle81]

Now I have power to the keypad. But back to where I was before the power went

 

[sparkymarka]

Post picture ...

 

[Wizzle81]

Here we go

 

[sparkymarka]

Hold down D button on the keypad ....does it say enter code ?

 

[Wizzle81]

No, it does nothing unfortunately

 

[sparkymarka]

Sounds like one of the data lines is off / faulty would have to try it on a euro mini to see what happens , ok