Pyronix V10

Joined
29 Dec 2021
Messages
3
Reaction score
0
Country
United Kingdom
Hi all, I’m new to this forum and this is my first post. I am a DIY installer and installed the alarm panel last year. I need to move the V10 WiFi panel to the adjacent wall. Please could someone advise if I will loose my settings if I relocate the panel to a new position. This will involve turning off the mains, opening the panel and refixing to the new position. Many thanks.
 
Sponsored Links
Joined
17 Jul 2018
Messages
300
Reaction score
15
Country
United Kingdom
No, just leave the panel running on the internal battery when moving it. Even if it fully powered down it wouldn’t lose its memory.
 
Joined
17 Jul 2020
Messages
214
Reaction score
23
Location
W.yorks
Country
United Kingdom
As diysosij says, the memory will be retained even if the system is powered down
 
Joined
29 Dec 2021
Messages
3
Reaction score
0
Country
United Kingdom
Thanks for your replies. Just one more question, with this version of panel should I be using ProControl+ or can I use HomeControl 2.0, as this offers Geofence? Thanks again.
 
Sponsored Links
Top