- Joined
- 6 Nov 2008
- Messages
- 818
- Reaction score
- 12
- Country
We have a radial circuit in our house wired in 4mm cable with 30amp breakers at the board.
I have discovered that sockets that have been added at a later date possibly by previous owner are wired in 2.5mm cable.
Is it possible to reduce the 30amp fuses to ones more acceptable for 2.5mm cable?
I have discovered that sockets that have been added at a later date possibly by previous owner are wired in 2.5mm cable.
Is it possible to reduce the 30amp fuses to ones more acceptable for 2.5mm cable?