Recent Rain Shower installation

[sd2901]

I recently had a rain shower unit installed and noticed there was some play on the arm.

Is this expected or should this arm be fixed?

See attached video.

 

[CountryFan]

There might be some play, but probably not as much as you have, that said how hard are you moving it?

 

[Madrab]

Can't see from the vid if it's the brass bracket that's fixed to the wall that's also moving along with the wet wall or if it's just the brass riser, that's fitted into that bracket on the wall (with the lever that fixes the adjustable height riser) hasn't had the allan key grub screw tightened properly.

Either or .... no - the vertical riser (edit) shouldn't move/twist to that degree.

 

[sd2901]

@CountryFan I am just tapping it lightly and there seems to be a lot of play.

@Madrab The brass fixing doesn't move along the wet wall. It's fixed. However, this is moving also.

That's both for your feedback. I am not familiar with rain shower units and it didn't seem right to me, so I wanted some validation. Thank you.

 

[Madrab]

So the PVC wet wall behind the brass fixing bracket, that the bracket is actually fixed to, is flexing as well?

 

[sd2901]

Yes, bar coming out is moving as the unit moves.