Recommend 0.1 bar modern basin mixer tap, ( mono mixer single lever) ??

Joined
24 Jul 2015
Messages
95
Reaction score
1
Country
United Kingdom
Hi

I have 0.1 bar hot water pressure. I am aware that many modern taps tend to operate effeciently only with minimum 0.2 bar. I am also aware from feedback that cartridge taps that state 0.1 may also operate at a dribble.

Can anyone recommend a modern looking tap ( with one lever at the top ) that HOT water works reasonably at 0.1 bar.

Otherwise I will have to be resigned to chose a mixer with 2 tap heads, of which there is a sufficient choice.

Thanks
 
Sponsored Links
Thanks for your suggestion wizza. Have you used or installed this tap yourself?
 
Sponsored Links
Does the highlight of the hot mean that the cold is at a different pressure?
If the hot and cold are not at the same pressure, any mixer tap will be useless.

I know what you mean regarding a mixer shower with uneven pressure...it's either too hot or too cold.I have an ikea edsvic kitchen mixer tap and the cold on mains works fine but the hot is slow.
Don't most basin mixers actually mix outside the tap ?
 

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Back
Top