Red flex?

[securespark]

By the way, FP is too dear to be considered.

Hope you can help

But you said your work bought it dead cheaply.....next time you're on a FA job, waz a bit...

Cheap as in about £120 quid for 100M.

What?? I can get 1.0mm2 4C+ E for 89 a roll......no wonder you think it's dear!!

 

[TheGaffersSon]

By the way, FP is too dear to be considered.

Hope you can help

But you said your work bought it dead cheaply.....next time you're on a FA job, waz a bit...

Cheap as in about £120 quid for 100M.

What?? I can get 1.0mm2 4C+ E for 89 a roll......no wonder you think it's dear!!

Like I said, I never bought the stuff. Just went off the first place I looked:
http://www.screwfix.com/app/sfd/cat/pro.jsp?cId=A431802&ts=84623&id=85104

 

[TheGaffersSon]

Besides 1.0MM is no good for me. It is to run an amplifier, this is why I said reg's regarding cable colour don't matter - just this once

 

[securespark]

My question still stands. Can't you get a short length from work - it is made in 2,5 as well...

 

[RF Lighting]

TLC sell 2.5mm² red firetuf by the meter. How much do you need?

http://www.tlc-direct.co.uk/Products/FT2dot5slash2R.html

I personally would go for bare copper pyro. Looks ace on an open brick wall.

 

[TheGaffersSon]

My question still stands. Can't you get a short length from work - it is made in 2,5 as well...

Yes will do mate - cheers.

 

[TheGaffersSon]

TLC sell 2.5mm² red firetuf by the meter. How much do you need?

http://www.tlc-direct.co.uk/Products/FT2dot5slash2R.html

I personally would go for bare copper pyro. Looks ace on an open brick wall.

Appreciate the help RF