I got given a 900mm Upvc fully glazed door which I have fitted into a brick opening through a wall into back of my garage.
I've fitted the frame Plumb and straight. However the door is catching on the bottom left. It will close but needs a good nudge to shut it.
The door hinge mechanisms are star shaped and have a flat side. They are obviously rising butt in nature. But at what point should the cam be located . I have them at best fit at moment. The hinge adjusters are fully up well tight. I haven't really played with the lateral adjusters.
Do I just whang a frame fix into frame to pull corner down ??
[/URL][/IMG]
I've fitted the frame Plumb and straight. However the door is catching on the bottom left. It will close but needs a good nudge to shut it.
The door hinge mechanisms are star shaped and have a flat side. They are obviously rising butt in nature. But at what point should the cam be located . I have them at best fit at moment. The hinge adjusters are fully up well tight. I haven't really played with the lateral adjusters.
Do I just whang a frame fix into frame to pull corner down ??