Refitting plastic cover to upvc porch

Joined
11 Jan 2009
Messages
1,038
Reaction score
5
Country
United Kingdom
40A71993-08B5-44E9-AA7E-9EE00EA66BB3.jpeg
3B206046-5D28-48FC-939F-62EBC6FAA631.jpeg
Hi

Corner cover from porch front has come off. Tried to temporarily redux with superglue but no joy. Adhesive has obviously dried, so guess need to reapply. Can you suggest best product please. Ta
 
Sponsored Links
Clear LMN silicone.
Sand paper (to rough up/key surfaces) then clean/degrease (with white spirit or solvent cleaner) then stick it on
 
Thanks for helpful response. Searched, and the stuff doesn’t seem to be available in main DIY stores. Is that right?
 
Its everywhere. LMN stands for Low Modulus Neutral cure.
To be honest any good quality adhesive would do, Us window fitter use the above as it wont damage/eat into PVC but for just sticking on a cap pretty much anything would do it
 
Sponsored Links
Thanks. Think I must have looked at the ones described specifically as LMN.
 
Hi again

One last query. Got the sealant, but how should so apply? Assume a series of beads across surface?

Process

1. Apply as above
2. Sand as indicated
3. Clean with white spirit
4. Reapply cap

Ta
 

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Back
Top