removing mould and sealing

[ETAF]

i have a had a lieak inside a partition wall in a bathroom all ixed

Now just want to elimimant the mould and seal in

the wall had insulation wool in, which i have removed
it was a leak at the celing , and dripped down inside to the floor

The partition wall was made of 3 or 5 ply which had mould on the outside , very slightly in places
and i cut out a piece beneathe the cupboard

MY plan , and if any one else can help and suggest alternatives

i shall use some bleach on the ceiling plaster board an on the plywood to remove the existing mould -

BUT Thats just the outside , cant get inside -

BUT i suspect once dried out in a week , if we get good weather , it will just die off anyway

OR would i be better off with a product specific for mould from screwfix

then I need to seal it all in - so paint wise

somehting like - this

Anti-stains spray paint Pintyplus Tech - Pintyplus

Anti-stains spray matte white paint to cover and seal definitely tough stains on walls and ceilings. High coverage product. Does not yellow. Inhibits moisture.

www.pintyplus.com

OR paint over with Zinsser B-I-N

What do you all think

 

[Wayners]

Wash what you can reach.
Let it dry.
Zinnser BIN then paint.

I've painted over mould loads of times.
I just wash over with sugar soap or warm water with a splash of bleach.
Don't get worried about it. All easy enough.
Washing off is not really very effective anyway as it is stained.

 

[ETAF]

thanks , excellent i got some BIN now - so once it has dried out - which is going to take a long while - we will wash down as suggested and then BIN it

Thanks again

 

[Wayners]

Get summer fans in to move air.
Will speed up drying time.

But to answer. Yeah

 

[ETAF]

got those going in the room and window wide open , then in evening i put a fan heater on just to get the rooma bit warmer, I alos have a small dehuidifier comming tonight - actually draw the water out , so we are not just recirculating it !!!!! - very very wet, in there , i suspect the wall has been soaked for weeks

 

[Collectors]

I found a good white vinigar & bleach solution with 3/4 water & then a good anti mold paint is a good sealer & the walls i did 2 year ago are still good.

 

[ETAF]

thanks