Rendering on house purchase

Joined
26 Aug 2026
Messages
2
Reaction score
0
Country
United Kingdom
Purchasing a property, 3 bed semi which is mostly rendered. I'm concerned about the bottom finish to the rendering as there is no drip stop and appears to have been "repaired" by smoothing to the brick. All the mortar has failed in the brickwork below the render. My proposal is to cut up a 2 bricks and install a drip step and re render and repoint. Unsure if it is line or cement. Replace the air bricks also. Another concern is how high the flags and concrete are that they may have breached the DPC. Any advice welcome
 

Attachments

  • 20260826_100352526.JPG
    20260826_100352526.JPG
    1 MB · Views: 8
  • 20260826_100319983.JPG
    20260826_100319983.JPG
    791.2 KB · Views: 8
  • 20260826_100327776.JPG
    20260826_100327776.JPG
    779.8 KB · Views: 7
  • 20260826_100322809.JPG
    20260826_100322809.JPG
    744.5 KB · Views: 7
  • 20260826_095838048.JPG
    20260826_095838048.JPG
    1 MB · Views: 7
  • 20260826_095831863.JPG
    20260826_095831863.JPG
    894.9 KB · Views: 7
  • 20260826_095804629.JPG
    20260826_095804629.JPG
    940.7 KB · Views: 7
  • 20260826_095801699.JPG
    20260826_095801699.JPG
    872.3 KB · Views: 8
Can't say by looking at pictures.
If it sounds hollow or in poor condition it's going to have to come off.
I've been following this DIY guy that's removed all the house render. Been on a rendering course and doing it all himself.
Maybe you could watch for interest..
 
Thanks for that I'll take a look. The rest of the render appears in good order besides one crack by the bay window and is not blown anywhere I've checked. I was thinking because there's been no drip stop that's why the lowest sections only have deteriorated.
 

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Back
Top