Is it possible to replace a 135° angle joint/connector on a uPVC window sill without taking the whole frame out? Or do I just buy a connector, cut out the inside, glue to the top of the sill and hope it lasts?
Replace uPVC Window Sill Connector
- Thread starter rossj81
- Start date
-
- Tags
- upvc window cill window sill
Sponsored Links
- Joined
- 14 Nov 2014
- Messages
- 1,483
- Reaction score
- 365
- Country
Well... that should have been a welded cill! thats why either side of the joint is slightly raised, I'm guessing it was cut as the cill was slighlty the wrong angle. Best bet buy an angle , cut to the right size to sit on top BUT before fitting fill that void with loads of white silicone , so that a/ no water can get under the cill , in the property , and B/ when you fit the joiner it will push the silicone out and around the joiner making a nice tight fit . Any excess that has squirted out can be cleaned up with rag
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
Sponsored Links
