Replacement overflow hose for GoodHome Lana basin (B&Q)

Joined
27 Mar 2011
Messages
172
Reaction score
2
Location
Buckinghamshire
Country
United Kingdom
Hoping someone can point me in the right direction. A few years ago I bought a GoodHome Lana counter top basin from B&Q, which came with its own waste and trap. It's still on sale today under the same product code: https://www.diy.com/departments/goo...gular-counter-top-basin-w-60cm/1644563_BQ.prd

The basin has an overflow, and a flexible plastic pipe runs from the overflow outlet down into the trap. That pipe has developed a hole, so any water that dribbles into the overflow during normal use ends up leaking under the basin.

B&Q don't sell the part separately, which surprised me given they still sell the basin. After some searching I thought the McAlpine FLEXCON1 (1 1/4" uni outlet x plain spigot) from Toolstation looked right, but in person it was far too big. It's basically a larger version of what I need, and they didn't have a smaller one.

Measurements of the old pipe:
  • Narrow spigot end at the bottom: roughly 25mm diameter (about 1")
  • Corrugated section: about 30mm diameter
  • Plastic nut at the top: about 40mm outside, 32mm inside
  • Length: about 200mm fully contracted, and I need around 300mm, which it extends to easily

Photo of the pipe:
content.jpg



Does anyone know of a compatible replacement, or even what I should be searching for? I'm at my wits' end with this one. Thanks in advance.
 

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Back
Top