Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Looking for a smarter way to manage your heating this winter? We’ve been testing the new Aqara Radiator Thermostat W600 to see how quiet, accurate and easy it is to use around the home. Click here read our review.
My cast iron manhole cover is broken I've bought a new one the same size but the corners are more rounded. How do I go about removing the old frame and putting in the new one?
Without being to simplistic you just need to break it out, take off the cover, get a chisel/bolster and bash it (with a hammer) from inside, under the old frame and work it all the way round til loose, clean off any old mortar and relay on 3:1 sand cement mix, jobs a good'un!
Chop out around existing frame with a hammer and bolster, (eye protection advised!). From inside carefully chisel the mortar bedding the frame, until enough is removed to lift frame off the masonry. Suitable care must be taken to prevent any debris going into the sewer! Clean as much mortar off the masonry as possible.
Bed new frame on fresh mortar, use a level or straight edge to align with surrounding area if need be. Smooth off internally, make good around externally as required. If you have a new cover with a plastic frame its best to put the cover in whilst mortar is still wet, these frames can distort and you may find the cover wont fit when the mortar has gone off.
If you need to find a tradesperson to get your job done, please try our local search below,
or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Please select a service and enter a location to continue...
Are you a trade or supplier? You can create your listing free at DIYnot Local
