Hi....
I,m replacing a plasic single switch with a metal one at the top of the stairs...
I have 3 switches ...one at the bottom...one at the top...and another leading into the dormer bedroom...
when i have taken the front off the plastic switch for the dormer...i have 4 connections. L1 L1 L2 L2..I have a switch wire going to L1 and L2...Then a red wire going L1 L2....from 2 different wires....
On the metal switch i only have 3 connections not 4...
Common L1 L2...not sure where the wires should go... as i would have one over....
any help would be great
thanks...
I,m replacing a plasic single switch with a metal one at the top of the stairs...
I have 3 switches ...one at the bottom...one at the top...and another leading into the dormer bedroom...
when i have taken the front off the plastic switch for the dormer...i have 4 connections. L1 L1 L2 L2..I have a switch wire going to L1 and L2...Then a red wire going L1 L2....from 2 different wires....
On the metal switch i only have 3 connections not 4...
Common L1 L2...not sure where the wires should go... as i would have one over....
any help would be great
thanks...