Replacing blown windows - clipping in corners
- Thread starter adamp03
- Start date
- Joined
- 24 Oct 2020
- Messages
- 6,118
- Reaction score
- 2,211
- Country
Lube.
I normally cover trim with masking tape so they don't mark and hit with a rubber mallet.
You want them to slide when clipped in or you get the problem you're having..
Trim needs to slide up a bit.
I use silicone spray but you can use a bit of soap
You might find that the angle you offer up to put in is incorrect. I've had this many times as well. When you get it worked out it's easy..
I normally cover trim with masking tape so they don't mark and hit with a rubber mallet.
You want them to slide when clipped in or you get the problem you're having..
Trim needs to slide up a bit.
I use silicone spray but you can use a bit of soap
You might find that the angle you offer up to put in is incorrect. I've had this many times as well. When you get it worked out it's easy..
Offer corners in first keeping centre bowed .
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
