Hey folks, I have taken off the old kitchen light, and took a photo of the cabling (attached). As well as a picture of all the cabling hanging down.
The new led batten light just has a blue and brown.
I've connected the blue to the single black wire
I've connected the brown to the group(4) of red wires.
Terminated the earth with a choc block
Terminated the block of black loop wires to choc block.
But no light power?
Any advice always welcome!
The new led batten light just has a blue and brown.
I've connected the blue to the single black wire
I've connected the brown to the group(4) of red wires.
Terminated the earth with a choc block
Terminated the block of black loop wires to choc block.
But no light power?
Any advice always welcome!
