Ive just bought a new room stat for my CH system I currentlty have a Potterton PRT2 which is not working quite well.
I Have purchased a Salus RT300 and was told it would just be a straight swap.
The wiring at the moment for the PRT2 is
5 - N - Blue wire
4 - TL - Red wire
3 - H - Yellow wire
2 - nothing except a jumper from 4
The Salus RT 300 has three conection points these are
Live
Switched Live
Earth
I understand there is no neutral require for the Salus RT300 and the Earth is fitted to the earth connection point! Any help would be very supportive?!
I Have purchased a Salus RT300 and was told it would just be a straight swap.
The wiring at the moment for the PRT2 is
5 - N - Blue wire
4 - TL - Red wire
3 - H - Yellow wire
2 - nothing except a jumper from 4
The Salus RT 300 has three conection points these are
Live
Switched Live
Earth
I understand there is no neutral require for the Salus RT300 and the Earth is fitted to the earth connection point! Any help would be very supportive?!