Hi guys, I was looking to replace the treads and risers for my parents.
I have never even thought about doing this kind of thing before, so please be gentle!
I was expecting to remove the treads/risers, to find stringers, then cut new treads/risers out of a sheet material then fix them down tight, but this is not the case.
The treads appear to be slotted into the side skirting, and supported by blocks underneath at each side. Then there is piece of timber in the middle for the riser to attach to.
Could anyone give any advice on how I should go about replacing them?
Many thanks,
Adam.
I have never even thought about doing this kind of thing before, so please be gentle!
I was expecting to remove the treads/risers, to find stringers, then cut new treads/risers out of a sheet material then fix them down tight, but this is not the case.
The treads appear to be slotted into the side skirting, and supported by blocks underneath at each side. Then there is piece of timber in the middle for the riser to attach to.
Could anyone give any advice on how I should go about replacing them?
Many thanks,
Adam.