Replacing stand alone cooker with oven & hob

[jaykay2]

Hi,
I have just removed a stand alone cooker & i want to wire in a seperate oven 1.2Kw & hob 6Kw. question is can i wire them both onto the wiring that was connected to the removed cooker? the seperate fuse for this wiring is 32amp

many thanks for any sound advice
john

 

[the_jinj]

The fuse would just handle that at 230v - what size of cable is existing? What was the power rating of the old cooker?

 

[jaykay2]

Just looked at the plate on the OLD cooker it says 9.82Kw so i guess that the wiring will handle it!! but i know in this game you do not guess as for the size of wiring the total width of the cable is 13mm and each of the power wires is 6 strand solid copper, how else do you tell?
thanks again
john

 

[the_jinj]

I guess you never used all the rings and cooker at once then....
And is probably 6mm going by your measurements