Rotten sleepers

Joined
17 Mar 2026
Messages
5
Reaction score
0
Country
United Kingdom
Can I get some advice on removing the rotten sleepers and replacing with some sort of stone/ brick work.
 

Attachments

  • IMG_9281.jpeg
    IMG_9281.jpeg
    959 KB · Views: 56
  • IMG_9280.jpeg
    IMG_9280.jpeg
    1.1 MB · Views: 56
I would replace the sleepers, they are relatively cheap and complement the existing design. And get rid of that overflying end fence panel, it gets windy in March
 
It looks to me like the only one that has started to split and rot is the top one. Get a joiner to repair or replace it for you.
 
Thanks for the reply’s. They are rotten here and there all the way round the patio, that part is the worst. I don’t think previous owner installed it properly/ just backs onto soil….no drainage/ gravel etc.. It isn’t a full retaining wall, as when you pull away the rotten timber soil is impacted under patio.
The 200x 100 cross timbers might be a diy job…. But unfortunately those 200x 200 posts that are spaced out are above my pay grade to tackle/ are cut out also so isn’t the best for diy tackling I think
Think best option is get somebody round, with best/ well cheapest option change like for like but install properly???
 
I'd advise replacing them with plain wood rather than painted. Teak oil will protect them better. The top step has sunk at one side as it is, so replacing using a dpc to help guard against water damage would be a better option.
 
It's an easily doable DIY job if you plan and take your time. I would replace with good, solid, chunky new sleepers that you can treat really well yourself.

You will save yourself a decent wad of money if you tackle it yourself.
 
Would I need the upright posts? Also how would I connect them together, as will be against patio. I’m thinking this time to have a gravel barrier around an inch between sleeper and patio for drainage ?!

Any idea help here is much appreciated, will be either myself, or I’ll get somebody in ..
 
Great idea I’ll keep wickes in mind as looks a good price. I think I might go for long ways as less cutting and no need to cement in..
 

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Back
Top