This is really a design question. I'm running SWA for a shed socket which will come off a 13A fused radial, which in turn is connected to the 32A ring on an RCD board.
My question is:-
A) Should I use an RCD socket in the shed?
B) Change the 13A FCU feeding the radial to an RCD FCU.
C) Just rely on the boards RCD.
My question is:-
A) Should I use an RCD socket in the shed?
B) Change the 13A FCU feeding the radial to an RCD FCU.
C) Just rely on the boards RCD.