Guys , I`ve coated my shiplap clad sun room with sad. Problem I had was the stuff was a pain to apply sucessfully . It seemed to run off the brush - couldn`t load it well - Now I`ve done a bit of decorating over the years , taught by my dad who was an old skool dec. So I know about most techniques , paint kettle - dip brush- tap on side etc. I used a 3 inch acrylic bristle brush . Ended up putting the 1 litre tin in a bucket and dipping into that - allowing the initial drips to fall in the bucket . I`ve done Magnet lead paint and Snowcem mixed from powder - does this old dog need to learn new tricks for the new paints