Safe install?

westie101 · 16 Sep 2011

The easiest way to sort this would be to place a 100mA time delay RCD infront of the CU - This would not comply to the 17th edition, but as your not working on those circuits as such, just sorting this issue out would be preffered.

Stick it between the meters and you cover the isolation issue as well!

Lectrician · 16 Sep 2011

Although, should you have isolation for an RCD too, at the rate the sh1te ones fail at

xr4x4 · 16 Sep 2011

Lectrician said:
Lights, Cooker and something else!

These circuits NEED protecting by an RCD.

The easiest way to sort this would be to place a 100mA time delay RCD infront of the CU - This would not comply to the 17th edition, but as your not working on those circuits as such, just sorting this issue out would be preffered.

Up and down lights, cooker.

RF Lighting · 16 Sep 2011

Lectrician said:
Although, should you have isolation for an RCD too, at the rate the sh1te ones fail at

Cheeky

diynot

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.

Are you a trade or supplier? You can create your listing free at DIYnot Local

Safe install?

westie101

Lectrician

xr4x4

RF Lighting

DIYnot Local

Similar threads