SALAMANDER CT50 Shower Pump

Joined
6 Jan 2009
Messages
8
Reaction score
0
Location
Lincolnshire
Country
United Kingdom
Hi all,

Looking at doing a new install for a mixer shower with a Salamander shower pump. My problem is which pump to use!!

The hot water tank is located approx 12 metres from the location of the shower, with the new pipework being installed from the hot tank on the first floor level, up into the loft and across pprox 12 metres to the bathroom, then down into an exposed Mira Discovery with 4 head spray pattern shower head.

What pump would be recommened for this application, bearing in mind the pump will also have to be fitted above the level of the hot water tank as there is not enough room in airing cupboard to fit the pump to the floor.

Any help or advice, much appreciated.
 
Sponsored Links

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Sponsored Links
Back
Top