Save me from the cold please (UPVC door)

[Pedd2022]

UPVC door is sealed at the top, but leaves a large gap at the bottom. I can’t for the life of me figure out what else to fiddle around with.

 

[DiyNutJob]

Try this. There are multiple of this.

 

[Pedd2022]

Try this. There are multiple of this.

View attachment 323296

Thanks! I’ve given it a go, but they’re already as far as over as they can be! Is there anything else I can do?

 

[RandomGrinch]

It looks like a Trojan hinge, I believe there may be compression adjustment on the bottom...

 

[DiyNutJob]

Look on the corresponding spots on the door leaf and see if there are adjustments there. If it's a manufacturing defect, then your are out of options on the adjustments.

Alternate solutions that will work to some extent are:

Stick on door leaf to close the gap.

Get these pants with built in fire! I am using one and have another on order. It's 100% polyester and will cling to skin if it catches fire. Other than that, it's effective and comfortable inside another pair of trousers.

 

[ronniecabers]

Im guessing you are pulling the handle up to engage the locking mechanism when you can see the gaps at the bottom ? Manufacturers will tell you a door isn't airtight/watertight until all locking points are engaged ( hence pulling the handle up ) .