Save me my kids wont sleep Need an ex adt alarm engineer my honeywell galaxy 8 needs reprogramming
- Thread starter koojie444
- Start date
Local engineer or google manual ...
This will take a bit of work.
You will need to enter the default manager code, then use 'Display -> Zones' and step through them in turn looking at the open/closed status while someone else triggers the various sensors in your home. After that, provide the list and a brief layout of where the sensors are. I will then tell you how to change the zone type and some other parameters accordingly.
You will need to enter the default manager code, then use 'Display -> Zones' and step through them in turn looking at the open/closed status while someone else triggers the various sensors in your home. After that, provide the list and a brief layout of where the sensors are. I will then tell you how to change the zone type and some other parameters accordingly.
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
