1. Visiting from the US? Why not try DIYnot.US instead? Click here to continue to DIYnot.US.
    Dismiss Notice

Scantronic 9100 re-arm question

Discussion in 'Alarms, CCTV & Telephones' started by fatfacedave, 3 Sep 2012.

  1. fatfacedave

    fatfacedave

    Joined:
    3 Sep 2012
    Messages:
    2
    Thanks Received:
    0
    Location:
    Hampshire
    Country:
    United Kingdom
    Hi, I am ressurecting an old scantronic 9100 series alarm fitted to my house, adding a gsm module.
    I've got it all working and understand the engineer programming, but have a problem with auto re-arm.
    I've got it set for re-arm several times, but upon activation the sirens run for the pre-determined time, after which the remote panel just keeps ringing like a phone with the number of the sensor that was triggered, along with the strobes running.
    I've left it running like this for an hour, until I put in the customer code.
    I was hoping re-arm operations meant it would re-arm itself after a period of time without user intervention - is that the case, and am I doing something wrong?
     
  2. fatfacedave

    fatfacedave

    Joined:
    3 Sep 2012
    Messages:
    2
    Thanks Received:
    0
    Location:
    Hampshire
    Country:
    United Kingdom
    Just to add, I've done a NVRAM reset and its still the same, so if anyone has any suggestions or info its time for a new panel :(
     
Loading...

Share This Page