ZONE 2 set as ER with b should work ok depending on option 61 ( starts EE in part )
Scantronic 9651
- Thread starter Carlos12
- Start date
Sponsored Links
Level B Entry Route Operation (Command 61) Command 61 controls how the system treats Entry Route zones during Part Set B. When the option is set to 0 all Entry Route zones included in Part Set B will continue to act as Entry Routes during Part Set B. When the option is set to 1 any Entry Route zones included in Part Set B will act as Final Exit zones during Part Set B
== 61, 1?
Level B Exit Mode (Command 62) Command 62 specifies the exit mode for Level B. Option 0 The keypad sounders and any internal sounders give a low tone when entering Part Set Level B. Use Command 65 to select the exit time. Option 1 Instant Set (no exit tone) Option 2 Silent Set. Use Command 65 to program the Exit time. At the end of the exit time the keypad gives a double beep confirmation tone. Option 3 Lock Set. See “Level A Exit Mode (Command 39) for an explanation of Lock Set. Option 4 Level B exit mode is the same as Level A. The system gives full volume setting tones. Note that the keypads give a double beep confirmation tone at the end of all setting modes
== 62, 3?
== 61, 1?
Level B Exit Mode (Command 62) Command 62 specifies the exit mode for Level B. Option 0 The keypad sounders and any internal sounders give a low tone when entering Part Set Level B. Use Command 65 to select the exit time. Option 1 Instant Set (no exit tone) Option 2 Silent Set. Use Command 65 to program the Exit time. At the end of the exit time the keypad gives a double beep confirmation tone. Option 3 Lock Set. See “Level A Exit Mode (Command 39) for an explanation of Lock Set. Option 4 Level B exit mode is the same as Level A. The system gives full volume setting tones. Note that the keypads give a double beep confirmation tone at the end of all setting modes
== 62, 3?
61 ....1
62 ....2 or 4 , 2 silent , 4 normal sound
62 ....2 or 4 , 2 silent , 4 normal sound
Sponsored Links
Worked a charm, thanks!
no probs
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
