What is the best way to seal 3/4" BSP parallel to parallel threads.
The shower valve I have states use parallel fittings only.
I need to seal the incoming water fittings (15mm to 3/4" BSP parallel) and a blanking plug at the bottom.
I can only assume that the female threads in the valve are parallel as the blanking plug screws in right up to the boss.
Hope someone can help.
The shower valve I have states use parallel fittings only.
I need to seal the incoming water fittings (15mm to 3/4" BSP parallel) and a blanking plug at the bottom.
I can only assume that the female threads in the valve are parallel as the blanking plug screws in right up to the boss.
Hope someone can help.