Hello all bit of a long story but will try to explain as best as possible and i am not a tiler just a DIY'er.
Ok about 5 years ago I tiled out the whole bathroom up to the ceiling with 600x400mm travertine tiles which took me ages but I did a really good job of it, Also inside the shower cubicle was done the same which is a walk in shower about 1200x600 in size.
Topps tiles who I bought the tiles from sold me some Colour intensifier and told me to give it all a coat and give the shower cubicle a few good coats and that would be ok.
I did this and there does not seem to be any leaks but after about every 6 months I have to re apply another coat in the shower as it starts to leak downstairs again.
Is there something I can apply in the shower that will last longer or anything better I can apply for this job, I dont mind paying £30 or something for a tin of something?
Hope you can advise
Leigh
Ok about 5 years ago I tiled out the whole bathroom up to the ceiling with 600x400mm travertine tiles which took me ages but I did a really good job of it, Also inside the shower cubicle was done the same which is a walk in shower about 1200x600 in size.
Topps tiles who I bought the tiles from sold me some Colour intensifier and told me to give it all a coat and give the shower cubicle a few good coats and that would be ok.
I did this and there does not seem to be any leaks but after about every 6 months I have to re apply another coat in the shower as it starts to leak downstairs again.
Is there something I can apply in the shower that will last longer or anything better I can apply for this job, I dont mind paying £30 or something for a tin of something?
Hope you can advise
Leigh