I'm upgrading my home alarm control panel and have purchased a Texecom Veritas R8 from my local electrical suppliers along with ADE Reson8 Bell Box (keeping the existing PIRs). Having connected up all the PIRs and tested them via the walk through ok but connecting the bellbox is becoming a problem as the guide to both bell box and control panel use different terminology for their connections and having taken a best guess at which wire should go where the fuse blows on me or the strobe does not light on testing (I've got the siren working on its own). Can anyone assist with the wiring of this please?
Bell Box connectors are labelled as follows
RTN - (T)
Hold Off + (D)
Hold Off - (A)
Trig (B)
Strb
Control Panel
Strb
0V
Tamp
Bell+
12V
The Strb -Stb I can manage but if someone can point me in the right direction.
Having checked both instruction manuals they seem to confuse me even further. If anyone can assist I would be really greatful.
thanks
AR
Bell Box connectors are labelled as follows
RTN - (T)
Hold Off + (D)
Hold Off - (A)
Trig (B)
Strb
Control Panel
Strb
0V
Tamp
Bell+
12V
The Strb -Stb I can manage but if someone can point me in the right direction.
Having checked both instruction manuals they seem to confuse me even further. If anyone can assist I would be really greatful.
thanks
AR