Hi,
Great forum so thought i`d see if anyone could point me in the right direction.
I`ve just had a Worcester greenstar 30cdi combi fitted and had to disconnect my old power shower.
I`m not sure on what to fit next. I`ve tested the flow and also the mains pressure and got the following results using a shower mixer head already connected to the taps.
Cold 10.5 l/m
Hot 7 l/m
Combined 12 l/m
Mains pressure is reading 1.5 bar or 22 psi on the gauge with no taps open but when i`ve ran both hot and cold taps together at the kitchen sink it has dropped down to .5 bar.
Thanks for reading, any replies are appreciated.
Great forum so thought i`d see if anyone could point me in the right direction.
I`ve just had a Worcester greenstar 30cdi combi fitted and had to disconnect my old power shower.
I`m not sure on what to fit next. I`ve tested the flow and also the mains pressure and got the following results using a shower mixer head already connected to the taps.
Cold 10.5 l/m
Hot 7 l/m
Combined 12 l/m
Mains pressure is reading 1.5 bar or 22 psi on the gauge with no taps open but when i`ve ran both hot and cold taps together at the kitchen sink it has dropped down to .5 bar.
Thanks for reading, any replies are appreciated.