Hi all,
Got an Aquatronic 2 electric shower.
It's a few years old but here's the problem.
We can't switch it off from inside the shower...to turn it off and on we have to use the main switch outside the bathroom. When I say turn it on and off I mean for the water to start coming through. The temp swich is ok and the power light stays on even when we switch it to the off position in the shower. Have taken the front off, checked wires but there are a 2 grey switches that have a small white button on that operates the water inflow, I think....but there's also a similar sized black switch about 1 inch by half inch with two terminals and again a little white switch, that does seem to work ok when I push it in and out but could this be the problem as I think it's this that works the power on and off. Please help..cheers.
Got an Aquatronic 2 electric shower.
It's a few years old but here's the problem.
We can't switch it off from inside the shower...to turn it off and on we have to use the main switch outside the bathroom. When I say turn it on and off I mean for the water to start coming through. The temp swich is ok and the power light stays on even when we switch it to the off position in the shower. Have taken the front off, checked wires but there are a 2 grey switches that have a small white button on that operates the water inflow, I think....but there's also a similar sized black switch about 1 inch by half inch with two terminals and again a little white switch, that does seem to work ok when I push it in and out but could this be the problem as I think it's this that works the power on and off. Please help..cheers.