My Showerforce 3 bar twin shower pump buzzes when I turn a tap on but will not run. Situated within bath panel below level of cylinder (no room near cylinder), 22m pipes. Inlet head = 2.3m, top of hot water cylinder to bottom of cold tank=1.3m.
Have replumbed pump outlet straight into bath, pressure good with pump off but still won’t go. Thought the pump was faulty so replaced it: no go. Previous 1.5 bar pump works (15mm pipes) but poor pressure through single lever tap into shower head. Have used Vax to clear air from system.
I've run out of ideas.[/img]
Have replumbed pump outlet straight into bath, pressure good with pump off but still won’t go. Thought the pump was faulty so replaced it: no go. Previous 1.5 bar pump works (15mm pipes) but poor pressure through single lever tap into shower head. Have used Vax to clear air from system.
I've run out of ideas.[/img]