Sime murelle he and hive

[jren37]

Guys
I’m looking for some assistance please
Setup is a Sime murelle he with a wr1 bg receiver and digitstat

Looking to put a hive in but my receiver is a dual channel.
I have wired into other boilers with a 230v connection
My question is
Is the Sime 230v or can it be switched.

If so where is the switch

Don’t have a manual to hand a small screen with no glassses so any assistance appreciated

Cheers

 

[jren37]

Pic attached

 

[CBW]

Edited, I was thinking of single channel version.

 

[jren37]

Not sure what you mean. Unless you mean I have the wrong version
I know that already but there is a way to wire them which I know how to do but it can only be done if there is a 230v from boiler so your succinct comment tells me nothing ??

 

[denso13]

if there is a 230v from boiler

The boiler has that capability, yes.

 

[CBW]

Not sure what you mean. Unless you mean I have the wrong version
I know that already but there is a way to wire them which I know how to do but it can only be done if there is a 230v from boiler so your succinct comment tells me nothing ??

Yes, apologies. I had written for a single channel, not dual channel, so that would have been useless too.

It’ll be L to L
N to N
Disregard Com and make safe
Connect NO to terminal 4

 

[jren37]

Hi thanks for that
Will check on how to make it 230v in boiler as that’s the bit I didn’t have