Skoda Roomster Low Beam Bulb

Joined
19 Jul 2004
Messages
191
Reaction score
1
Country
United Kingdom
I have a 2008 Skoda Roomster 1.6 Petrol Auto. The low beam light has gone on one side, the high beam is fine. According to the manual there is only a single H4 (low beam and main beam) bulb in the fitting, no mention of a separate low beam bulb .

I opened the cover on the other side to see if there are two separate bulbs because the faulty end has got a charcoal filter in the way of the cover. I can see the H4 main beam but I can't see another bulb.

Help!
 
H4 or H7 depending on which fitting you have. Remove the one you can access and see what it says on the body.
 
Its a H4. I'm confused, if there is only one bulb and the main beam is fine then why change it. But then how do I get the low beam to work again. I thought there must be two separate bulbs, but I can only see the one. Is the low beam somewhere else?
 
I'm confused a bit.....the H4 is a two filament, three wire bulb - all you need.
If one beam has failed, extract the bulb and the filament failure will be obvious.
John :)
 
Aah, I understand now. It has three connectors at the bottom. So I assume that one is for the ground, then one for high beam and one for low beam. Thank you for explaining that.
 
Back
Top