Soil pipe 'extension' piece with a built in 92.5° Bend ???

[cabinman]

Hi all,

Does such an item exist ?? A soil pipe, one end striaght and the other end with a 92.5° Bend

reason - to attach to pan connector, go through cavity wall and bend to attach to coupler and on to the soil stack

Yes, I can get a pan extension and attach a loose 92.5° Bend, but as I need to join to an existing soil stack, the pipes are then mis-alined, unless I recess the bend 'rubber' end into the wall itself - would that be plausable?

Would mean chisling out a rebate in the 4" core hole I have already made - as the 92.5° Bend 'rubber' end is too fat to fit

Hope that was clear lol - thanks in advance,

 

[doitall]

Use a solvent weld bend, they're not so fat.

 

[cabinman]

haha doh.... thanks doitall, I will look into that option - sounds perfect

 

[Hugh Jaleak]

If you struggle to find any 4" solvent fittings, gimme a shout. Have a garage full of them.....

 

[cabinman]

If you struggle to find any 4" solvent fittings, gimme a shout. Have a garage full of them.....

Thank you for that kind offer

going to try some plumbers merchants today

 

[doitall]

BSS, PTS, Pipeline, PLumbcenter.

You should be looking for Terrain or polypipe

 

[Nige F]

Hi all,

I recess the bend 'rubber' end into the wall itself - would that be plausable?

Would mean chisling out a rebate in the 4" core hole I have already made - Hope that was clear lol - thanks in advance,

Got a small sharp cold chisel Go for it and save buggering about among the Bank Holiday Hordes