- Joined
- 2 Feb 2020
- Messages
- 5
- Reaction score
- 1
- Country
Hi All,
Wonder if you can help. I've taken on a home DIY project of adding a new bathroom in my house and planned on moving my down stack from upstairs. The big issue i have is the Cowboy of a builder who built my house never ran my soil pipe outside of my property it goes directly underneath my kitchen through my garage and into my neighbors house.
With this in mind there is no way i can install chamber outside of the property to allow for easy simple connections. ( floor plan image, "red line is exisiting" "blue line is new pipe" )
To complicate matters futher my soilpipe is 1.2m below the level of my garage floor making access for rodding nearly impossible.
Im attaching some pictures of my excavated pipe in the hope you might be able to assist me.
My hope was that i can connect into this existing pipe with a Y piece which runs at an uphill gradient to my new bathroom area with a rodding/acces point in the bathroom. Then with the exisiting run put a rodding point there to go down the straight run.
Still futher making this a tricky sitiuation the propery currently has NO Rodding points outside the toilet and the Main drain location 3 houses away!!
I do hope someone is able to assist or advise on this. Do i need to do some pleading with my BCO!
Thanks in advance,
Michael
Wonder if you can help. I've taken on a home DIY project of adding a new bathroom in my house and planned on moving my down stack from upstairs. The big issue i have is the Cowboy of a builder who built my house never ran my soil pipe outside of my property it goes directly underneath my kitchen through my garage and into my neighbors house.
With this in mind there is no way i can install chamber outside of the property to allow for easy simple connections. ( floor plan image, "red line is exisiting" "blue line is new pipe" )
To complicate matters futher my soilpipe is 1.2m below the level of my garage floor making access for rodding nearly impossible.
Im attaching some pictures of my excavated pipe in the hope you might be able to assist me.
My hope was that i can connect into this existing pipe with a Y piece which runs at an uphill gradient to my new bathroom area with a rodding/acces point in the bathroom. Then with the exisiting run put a rodding point there to go down the straight run.
Still futher making this a tricky sitiuation the propery currently has NO Rodding points outside the toilet and the Main drain location 3 houses away!!
I do hope someone is able to assist or advise on this. Do i need to do some pleading with my BCO!
Thanks in advance,
Michael