I've moved my toilet to about 2 metres down the wall so have some internal work to do on the 110mm pipe
The existing pipe pops out into the bathroom in the wrong direction by 90 degrees to where the toilet is, I plan to put a 90 degree bend on it so it is pointing at the toilet side, but this will mean it is about 70 mm sticking out too far from the wall.
So I need to shift it nearer the wall I have just bought one of the below (magic flex) but it is not really flexible enough and would put pressure on the bend into the vertical downpipe
https://www.wirquin.co.uk/wastes/ma...ible-elbow-soil-pipe-male-to-female-grey.html
Other option would be to put two 135 degree angles together but this would mean 3 joints in a short pipe, or try one of them double angle joints but I don't think this would end up horizontal to the wall
Hope this makes sense, please ask any questions if not, thanks for any help
The existing pipe pops out into the bathroom in the wrong direction by 90 degrees to where the toilet is, I plan to put a 90 degree bend on it so it is pointing at the toilet side, but this will mean it is about 70 mm sticking out too far from the wall.
So I need to shift it nearer the wall I have just bought one of the below (magic flex) but it is not really flexible enough and would put pressure on the bend into the vertical downpipe
https://www.wirquin.co.uk/wastes/ma...ible-elbow-soil-pipe-male-to-female-grey.html
Other option would be to put two 135 degree angles together but this would mean 3 joints in a short pipe, or try one of them double angle joints but I don't think this would end up horizontal to the wall
Hope this makes sense, please ask any questions if not, thanks for any help