Solid Floor
- Thread starter Clueless
- Start date
Sponsored Links
Yes,you can cut a channel for pipe but must be wider to take the pipe insulation to protect the copper pipe against cement (that if you do have copper pipe) Normally you have 50mm floor screed which sit on top of concrete oversite so it should be deep enough then you would have to extend the pipe etc.If you going to use a grinder it will produce a lot of dusts.Sometimes it's easier to make a box skirting type to cover the pipe and if you're fussy then you would have to do the whole room to match!
Another thought,you probably can chop it into the wall behind the skirting board and maybe use a square timber nailed to the top & bottom of the skirting board so the skirting board looks thicker etc.
Another thought,you probably can chop it into the wall behind the skirting board and maybe use a square timber nailed to the top & bottom of the skirting board so the skirting board looks thicker etc.
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
Sponsored Links
