I have an idea of using the space above my soon to be installed circulating cooker hood to sit a mircrowave oven on and would like to achieve desired strength by anchoring small wire ropes either side of it from wall to hood top at 45 degrees. Where would i get the wire, bolts, anchors etc?
Steel rope, anchor etc
- Thread starter kaseryn
- Start date
Sponsored Links
A marine chandler would be as good a place as any. I'm not sure where in London you are but Arthur Beale on Shaftesbury avenue sell everything you need. You'd probably find better prices at one of the chandlers in Essex though (TCS chandlery maybe?)
You could also try a handrail/architectural metalwork type place. I know that FH brundle do what you need.
A lot of builders merchants will sell the wire rope and fittings but you'll end up with a fairly ugly assembly using bolt together components. A crimped cable with proper eyes/ferrules will look neater.
You could also try a handrail/architectural metalwork type place. I know that FH brundle do what you need.
A lot of builders merchants will sell the wire rope and fittings but you'll end up with a fairly ugly assembly using bolt together components. A crimped cable with proper eyes/ferrules will look neater.
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
Sponsored Links
