Sub base for plastic shed

[Longshanks]

Hi

Am about to erect plastic shed to replace wooden one (Gemini 6*6 made by Keter).

Piccies of the designated area are in my album. I've cleaned it up and marked it out but would appreciate any advice on depth and type of sub base for the paving slabs I'm going to use. The shed will be used for mower, tools etc etc.

Many thanks

L

 

[PrenticeBoyofDerry]

What type of flags are you laying?
Are laying flags over the whole area and shed sitting on top?
or flags just around outside permitter of shed and shed sat on slab?
any electrical connections needed, to power shed?

 

[Longshanks]

Hi

Was going to out shed on flags.

No power needed.

Ta

L

 

[PrenticeBoyofDerry]

Flagstones can be laid on either 40mm bed of coasre grit sand or a cement mortar of between 20-40mm.
A good site to visit for this type of project is pavingexpert.
Will be able to explain better and some good info availbale.
http://www.pavingexpert.com/layflag3.htm#bornb

 

[Longshanks]

Many thanks