Actually this all came about because I need to run power to an outbuilding, I have another small 2 way metal CU to be fitted (to the right of the current CU) which will supply it, I need to earth the armour of the 10mm2 2-core SWA that will be terminated in an adaptable box on the outside wall. So I need an earth block so I can run one earth to the main CU and one to the gland in the adaptable box. The DNO earth block only has capacity for one cable.
Supply type identification and opinion on earth loop reading
- Thread starter Muzza80
- Start date
Actually this all came about because I need to run power to an outbuilding, I have another small 2 way metal CU to be fitted (to the right of the current CU) which will supply it, I need to earth the armour of the 10mm2 2-core SWA that will be terminated in an adaptable box on the outside wall. So I need an earth block so I can run one earth to the main CU and one to the gland in the adaptable box. The DNO earth block only has capacity for one cable.
Sponsored Links
Yeah, replace it with mine would probably make most sense, fair enough. Cheers!
Sponsored Links
- Joined
- 26 Aug 2016
- Messages
- 6,833
- Reaction score
- 1,010
- Country
Didn't spot that, ours looks the same from the outside but has space for about 6!
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
