- Joined
- 14 Dec 2023
- Messages
- 2
- Reaction score
- 0
- Country
Can anyone advise how to remove the lever handles of this tap? Thanks. The tap is dripping and I suspect the cartridge needs replacing. Thank You.
-
Looking for a smarter way to manage your heating this winter? We’ve been testing the new Aqara Radiator Thermostat W600 to see how quiet, accurate and easy it is to use around the home. Click here read our review.
Swan Neck Tap Dripping
- Thread starter Pedro Swan
- Start date
1. Unscrew the small round chrome bits above the blue / red lines.
2. Use a Boa type strap wrench or grips with a piece of leather / rubber to preserve the chrome.
3. If they are very stiff:
3.1 Try de-scaling with something like Kilrock first.
3.2 Pour boiling water over the taps to expand the brass first.
2. Use a Boa type strap wrench or grips with a piece of leather / rubber to preserve the chrome.
3. If they are very stiff:
3.1 Try de-scaling with something like Kilrock first.
3.2 Pour boiling water over the taps to expand the brass first.
Those handles and the larger round section that is part of it have grub screws on the back of larger section, turn off the water and turn the handle as if it was full on and you'll see them, loosen them with an allan key and the tap head lifts up and off.
- Joined
- 14 Dec 2023
- Messages
- 2
- Reaction score
- 0
- Country
Many thanks Madrab and I greatly appreciate your advice which was spot on! Off to B &Q I go!!
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
