I should point out first of all that I have looked through the Wiki for this forum, but just can't seem to find the answer.
Whilst decorating, have taken a light switch off the wall. Unfortunately, a couple of the wires have dislodged, and I can't work out how to wire everything up again.
On the switch I have 6 terminals
COM (x2)
L1 (x2)
L2 (x2)
The 2 COM terminals are linked by a jumper wire.
I have 2 red cables, and a black cable
And an Earth cable (hasn't moved)
The way it worked before -
Left switch operated light
Right switch operated extractor fan (but only if light switch was on).
Can anyone assist please?
Thanks
Alex
Whilst decorating, have taken a light switch off the wall. Unfortunately, a couple of the wires have dislodged, and I can't work out how to wire everything up again.
On the switch I have 6 terminals
COM (x2)
L1 (x2)
L2 (x2)
The 2 COM terminals are linked by a jumper wire.
I have 2 red cables, and a black cable
And an Earth cable (hasn't moved)
The way it worked before -
Left switch operated light
Right switch operated extractor fan (but only if light switch was on).
Can anyone assist please?
Thanks
Alex