Is it possible to terminate SY cable (3 x 1.5mm) into a 16A Ceeform socket?
It will be glanded at the other end!
It will be glanded at the other end!
SY cable termination
- Thread starter nozspark
- Start date
Sponsored Links
strip the braid long and twist it then earth sleeve it long enough to reach the earth pin, tape up or sleeve it also so no braid is exposed.
Rocky,
that's what I was thinking, but it don't sound right
that's what I was thinking, but it don't sound right
The only other way I have seen is a gland screwed into the socket with a banjo and earth wire, but that looks kack
Sponsored Links
Why should that look kack? Nobody minds when it's SWA.
Does noz mean a fixed socket, or a trailing one?
Does noz mean a fixed socket, or a trailing one?
I presumed he means a female blue trailing plastic socket,I have seen the plastic bush removed and a gland screwed in with the banjo sticking out.
It is hard to describe sorry.
Sorry guys, I meant a trailing plug
It's for a morticing machine in a wood working shop.. they want to be able to move it around and plug into existing Ceeform sockets.
At the moment it's got a rubber cable with a metal flexible conduit 'like' outer sheath----into a standard plug top
It's for a morticing machine in a wood working shop.. they want to be able to move it around and plug into existing Ceeform sockets.
At the moment it's got a rubber cable with a metal flexible conduit 'like' outer sheath----into a standard plug top
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
