Tap fittings

[Bedazzled66]

Hello,
My wife has bought some new bath taps that have a 22mm thread. However the old ones are connected to 15mm flexi hoses. To replace these hoses with 22mm would require me to take the bath out (its on a raised platform)- something I would rather not do if I can help it.

Does anyone know if you can get some sort of a reducer down to 15mm for the 22mm tap threads? I could then use the 15mm flexi hoses to connect them up.

Thanks in advance for your help.

 

[kirkgas]

what you need is 3/4"FI(female iron) x 15mm BSP (for pipe) tap adaptors, seal the adaptors onto taps with PTFE or similar, remove the nuts and rings and fit the flexis to the end of the fittings

 

[Bedazzled66]

Thanks for your help that worked a treat!!!

 

[happytears]

Is there an updated method of doing the above in 2023, ? I ask because I have a 15mm hot tap I want to put into my cold water supply but the Flexi is for 22mm without having to change the Flexi l.