Texecom elite 64 tamper

[craftycooky]

Hi,

Last night at 03:36 i was woken up by a tamper alarm from the front door micro contact. Entered a master code and stopped with tamper error on keypad.

An hour later same tamper alarm, entered master code and reset error on keypad.

After doing this the sensor led was flashing green for a while.

Its now 10:48 and no more alarms.

There is no low battery warning.

This is the log.

0001 03:36:12 20/01/2024 Tamper Alarms . . . . Zone 012 Tamper Alarm - Front Door
0002 03:36:14 20/01/2024 Restore . . . . Zone 012 Tamper Restore - Front Door
0003 03:37:07 20/01/2024 Not Reported A . . . System Access by User 01 - Master
0004 04:36:12 20/01/2024 Tamper Alarms . . . . Zone 012 Tamper Alarm - Front Door
0005 04:36:14 20/01/2024 Restore . . . . Zone 012 Tamper Restore - Front Door
0006 04:36:47 20/01/2024 Not Reported A . . . System Access by User 01 - Master
0007 04:37:01 20/01/2024 Not Reported A . . . System Access by User 01 - Master
0008 10:29:04 20/01/2024 Maint. Alarm A . . . Download Start

Any idea what could have caused this.

The whole system is wireless.

Thanks

Dave

 

[craftycooky]

Apparently older versions of the micro contact w signalled a low battery by means of a tamper. This was changed in later versions.

Dave