Hi there. I am having an issue with the above. my weekend project was connecting a second bellbox (texecom oddysey 3) to my alarm system (scantronic 9600). the current bellbox is also a texecom oddysey 3 btw.
I have set the second unit on scb mode and wired it up as it shows in the manual and followed the instructions on the tamper set up. anyway this is what the manual says " remove the tamper wire from MSW 2 on the first unit and connect to spare core. on second unit connect spare core to MSW 1.
So i have done what it says but the problem is the first unit is staying in hold off (left led flashing) regardless and the panel showing "unit tamper" (sounder tamper). the second unit works fine its just the first unit giving me trouble.
hope this is clear and thanks in advance
I have set the second unit on scb mode and wired it up as it shows in the manual and followed the instructions on the tamper set up. anyway this is what the manual says " remove the tamper wire from MSW 2 on the first unit and connect to spare core. on second unit connect spare core to MSW 1.
So i have done what it says but the problem is the first unit is staying in hold off (left led flashing) regardless and the panel showing "unit tamper" (sounder tamper). the second unit works fine its just the first unit giving me trouble.
hope this is clear and thanks in advance